.jpg)
.jpg){kind=small}
.gif){kind=small}
.jpg)
.jpg)
Biodiesel
.jpg)
Biodiesel fuels tend to collect water quickly, especially in warmer environments. Typically, these fuels are fully saturated at approximately 40 ppm of water in a 40ºF environment. At 95ºF, they become saturated around 117 ppm. The Engine Manufacturers Association recommended Guideline on Diesel Fuel (EMA FQP-1A) specifies a 200-ppm maximum total water content in diesel fuels.
Saturated fuels can harm your equipment and slow down your operation. Kaydon Filtration offers you an innovative way to isolate and remove harmful water from biodiesel processing and storage operations. By installing our coalescing technology solution at your processing facility, you can:
.jpg)
-
Effectively remove water from biodiesel products prior to the polishing stage, in accordance with ASTM standards
-
Remove particles at the final polishing stage, in accordance with ASTM standards
-
Reduce overall manufacturing times
-
Contain unnecessary manufacturing and labor costs
-
Reduce the number of production steps
-
Increase profits and provide a higher quality end product
To learn more about Kaydon Filtration solutions for biodiesel applications and how they’ve been successfully used by a wide variety of customers, click on the link below or contact your Kaydon Filtration solutions expert.